Clean, double frame vacuum truck with Vacall system, steel debris tank, Dresser Roots blower, Cat C13 engine with 380 HP, Allison 4000 RDS automatic transmission, 20K front axle, 46K rears, Hendrickson spring suspension, 425/65R22.5 front tires, 11R22.5 rear tires, 276" wheelbase, 194" C-T, 20'6" of frame behind the cab, and 5.63 ratio. Body can be removed...

Mack day cab tractor with Mack AC-350 engine with 350 HP, Meritor 10-speed transmission, 12K front axle and 40K rears on air ride suspension, 11R22.5 tires, and 162" wheelbase...

Clean, heavy spec day cab with Cat C13 engine with 430 HP, Allison automatic transmission, 20K front axle, 46K full locking rears, 425/65R22.5 front tires and 11R24.5 rear tires, Hendrickson air ride suspension, 242" wheelbase, and headache rack...

Double frame cab over truck with Heil 25 CYD split body rear load packer, 20K front axle, 46K rears, 315/80R22.5 front tires and 12R22.5 rear tires, Camelback suspension, Allison automatic transmission, LH and RH drive, 84" wheelbase, 158" C-T, and 17'6" of frame behind the cab if the packer is removed...

Cat 306CR excavator with swing boom, auxiliary hydraulics, quick coupler, hydraulic thumb, 24" bucket, 16" rubber tracks, backfill blade, EROPS, A/C, pattern changer, rear view camera and 15,766 lb. operating weight...

Clean, double frame flatbed truck with moffett carrier, 22' x 96" steel bed and headache rack, Allison 3500 RDS-P automatic transmission, International DT466 engine with 260 HP, 14K front axle, 40K rears, 12R22.5 front tires and 11R22.5 rear tires, Hendrickson HN suspension, 256" wheelbase, 190" C-T, 23' of frame behind the cab, and 5.29 ratio...

Mack flat top sleeper, Eaton-Fuller 18 speed transmission, Mack AC engine with 460 HP, 13,220K front axle, 46K rears, 315/80R22.5 front tires and 11R24.5 rear tires, air ride suspension, 220" wheelbase, headache rack, and wet line...

MFWD tractor with 16F/16R powershift/shuttle transmission, 3 remotes, suspension cab, 460/85R34 rear tires, 380/85R24 fronts (new).****WARRANTY COMPREHENSIVE: 2,500 HRS / 25 OCT 2026***...

Double frame Peterbilt winch truck with Tulsa Winch Rufnek winch with 65K lb. capacity, tail roller, Cat C15 engine with 485HP, Eaton-Fuller 18-speed transmission, 14,320 lb. front axle and 46K rears, 11R24.5 tires, 12K steerable lift axle, Air Trac suspension, 282" wheelbase, 190" C-T, and 20'4" of frame behind the cab...

Heavy spec, triple frame pole truck with 23K front axle and 65K rears, 445/65R22.5 front tires and 12.00R24 rear tires, walking beam suspension, 30'6" x 9'2" deck with tail roller, Tulsa Winch Rufnek winch with 100K lb. capacity and Tulsa Winch Rufnek winch with 45K lb. capacity, Maxitorque ES 10-speed transmission, Mack AI-427 engine with 427 HP, PTO, 390" wheelbase, 310" C-T, and 30'6" of frame behind the cab. Odometer reads 11,366 miles and h...